MEK Ink Cartridge-Black 110ml Methyl Ethyl Ketone EBS-250

• Best Application Surfaces: Metal, concrete, plastic
• Other Recommended Application Surfaces: Porous, Smooth, Absorbent, Metal, Polyvinyl Chloride (PVC), PVC Pipes, Polyurethane (PU), Polypropylene (PP), Polyethylene (PE), Glass, Wood, Paper/Cardboard, Rubber, Textile, Concrete
• UV tolerant: Not UV resistant but pigmented ink lasts longer outside than non-pigmented ink

Cleaning Procedure: Black MEK Based Ink

• Daily: The print nozzle on the face of the printer should be sprayed with the MEK External Cleaning Solution and dry the nozzle plate face with a microfiber cloth.
• Every two days: Purge the unit by flushing the system with the MEK Cleaning Cartridge

How-To Purge:

• Power down the printer
  • Remove the ink cartridge
  • Before Installing a cleaning cartridge, ensure you have the proper cartridge or the printer will not accept it. Your cleaning cartridge should match the type of ink your printer is configured to print.
  • Power on the printer and printer will begin to pressurize, wait for the printer to complete pressurization
• In a well-ventilated area rapidly press the trigger three times, hold the trigger down on the third press.
  • The unit will sound three beeps
  • Point the unit towards a scrap piece of cardboard/hazmat container
  • The unit will sound two beeps then fire all 16 nozzles at once
  • Purge the unit for approximately. 10-15 seconds, then release the trigger.
• Power down the unit and install the ink cartridge to prevent dust and contaminants from entering the unit.

This product requires hazmat certification to ship and is nonrefundable unless the unopened product can be returned to Dasco.